Raleigh, NC Fiber Optic UG/Splicers Crews Needed!!
Contractor: Corp-to-Corp
North Carolina
Raleigh
Starts
ASAP
Pay
Please leave your Phone number and Email when responding. Worried about being paid properly and on time? Never an issue with us, weekly pay!
Qualifications
Must have drop bury experience and Splicing Fiber Optic. Looking for multiple crews.
Other Requirements
Must pass industry-standard background check and UA. Have a good driving record (no CDL required). Likes to work outdoors and be physically fit and able to do dig, and work with shovels, rakes and assorted hand tools.
Job Description
Surveying the customer's home and plan route for drop.
Make customer contact. Check all locations to plan routes for drop.
Check for sprinklers and dog fences or any other customer run utilities to plan routes for drop.
Pull 2 count flat fiber and tone-able mule tape through conduit from NAP vault to customer's vault.
Hand digging under the customer's vault to get fiber out of the vault to run to the house.
Do sidewalk bores when applicable by digging on either side and running the machine with bore rods or drill and flex bit.
Hand digging a foot deep at the house to bury sweep.
Attach sweep to riser up to the NID. Install NID.
Pull fiber through sweep and riser and coil up extra for splicer.
Operating a Ditch Witch 410sx either using the machine or hand digging a trench from customer vault to the NID at a minimum of an 8" depth.
Placing the fiber and tracer wire in the trench and filling the trench back up.
Yard restoration/clean up.
Fiber Splicing
Make customer contact. Check all locations to plan routes for drop.
Check for sprinklers and dog fences or any other customer run utilities to plan routes for drop.
Pull 2 count flat fiber and tone-able mule tape through conduit from NAP vault to customer's vault.
Hand digging under the customer's vault to get fiber out of the vault to run to the house.
Do sidewalk bores when applicable by digging on either side and running the machine with bore rods or drill and flex bit.
Hand digging a foot deep at the house to bury sweep.
Attach sweep to riser up to the NID. Install NID.
Pull fiber through sweep and riser and coil up extra for splicer.
Operating a Ditch Witch 410sx either using the machine or hand digging a trench from customer vault to the NID at a minimum of an 8" depth.
Placing the fiber and tracer wire in the trench and filling the trench back up.
Yard restoration/clean up.
Fiber Splicing
Contact
x x x x Canceled/Expired Listing x x x x
listed •
expires
job listing #96641 •
tiny link cabl.co/eziT