Fiber Splicer
Independent Contractor
Kentucky
Campbellsville
Texas
Fabens and Cushing
Job Description
We have a requirement for Fiber Splicers for our project in Campbellsville, KY, and both in Cushing and Fabens, TX.
This project is expected to go on through the end of the year.
The work schedule is 6 days a week.
Job Description:
1. Terminal Point (Accessible / Inaccessible):
This unit includes all labor, equipment, tools, and incidental materials required to fusion splice, place terminal, and test fiber cable. All work shall be done based on work prints provided by the Customer. The contractor shall test for light before splicing, which includes the following:
• Preparation of cable for splicing (ring cut), including bonding and grounding for non-dielectric cable.
• Fusion splice fiber (single burn typically; if splicing flex ribbon in the buried plant, may require 1 or 2 mass fusion splices also).
• Placing universal splitter bulkhead module (USBM) and pigtail.
• If aerial terminal or buried in handhole, closure shall be sealed per manufacturer specifications and mounted in place per the design.
• If the terminal is in a pedestal, include placing a splice tray and, if applicable, placing the supplied mounting bracket in the pedestal.
• Testing of fiber and recording optical power levels on work prints.
2. Branch / Reel End Splice Point:
Used where 2 or more open ends of fiber require splicing and closure, this unit includes all labor, equipment, tools, and incidental materials required to mass fusion splice, place closure, and test fiber cable. All work shall be done based on work prints provided by the Customer. The contractor shall test for light before splicing, which includes:
• Preparation of cable ends for splicing, including bonding and grounding for non-dielectric cable.
• Mass fusion splicing fiber (ribbonizing loose tube where applicable).
• Placing universal splitter bulkhead module (USBM) and pigtail when necessary (if also a terminal location).
• Placing closure, sealed per manufacturer specifications.
• Testing of fiber and recording optical power level at endpoints as appropriate (test results at terminal or FDH down the line to the field will suffice).
Job Equipment Types:
1. Closures (to be installed by Contractor):
- Multi-Link Optima-U
- Multi-Link Optima-LG (optima-16)
- AFL Apex
- PLP Large Coyote
- Charles Industries FSDC
2. Pedestals:
- Primary – Charles Industries 8” (installed prior to Contractor performing Work)
- Secondary – Channel 9” round; Charles Industries 10” and 12” (installed prior to Contractor performing Work)
- Charles Splice Trays (to be installed by Contractor)
3. FDH’s:
- Clearfield ribbon fiber blue cassettes (to be installed by Contractor)
This project is expected to go on through the end of the year.
The work schedule is 6 days a week.
Job Description:
1. Terminal Point (Accessible / Inaccessible):
This unit includes all labor, equipment, tools, and incidental materials required to fusion splice, place terminal, and test fiber cable. All work shall be done based on work prints provided by the Customer. The contractor shall test for light before splicing, which includes the following:
• Preparation of cable for splicing (ring cut), including bonding and grounding for non-dielectric cable.
• Fusion splice fiber (single burn typically; if splicing flex ribbon in the buried plant, may require 1 or 2 mass fusion splices also).
• Placing universal splitter bulkhead module (USBM) and pigtail.
• If aerial terminal or buried in handhole, closure shall be sealed per manufacturer specifications and mounted in place per the design.
• If the terminal is in a pedestal, include placing a splice tray and, if applicable, placing the supplied mounting bracket in the pedestal.
• Testing of fiber and recording optical power levels on work prints.
2. Branch / Reel End Splice Point:
Used where 2 or more open ends of fiber require splicing and closure, this unit includes all labor, equipment, tools, and incidental materials required to mass fusion splice, place closure, and test fiber cable. All work shall be done based on work prints provided by the Customer. The contractor shall test for light before splicing, which includes:
• Preparation of cable ends for splicing, including bonding and grounding for non-dielectric cable.
• Mass fusion splicing fiber (ribbonizing loose tube where applicable).
• Placing universal splitter bulkhead module (USBM) and pigtail when necessary (if also a terminal location).
• Placing closure, sealed per manufacturer specifications.
• Testing of fiber and recording optical power level at endpoints as appropriate (test results at terminal or FDH down the line to the field will suffice).
Job Equipment Types:
1. Closures (to be installed by Contractor):
- Multi-Link Optima-U
- Multi-Link Optima-LG (optima-16)
- AFL Apex
- PLP Large Coyote
- Charles Industries FSDC
2. Pedestals:
- Primary – Charles Industries 8” (installed prior to Contractor performing Work)
- Secondary – Channel 9” round; Charles Industries 10” and 12” (installed prior to Contractor performing Work)
- Charles Splice Trays (to be installed by Contractor)
3. FDH’s:
- Clearfield ribbon fiber blue cassettes (to be installed by Contractor)
Contact
(813) 295-2007
Please Login to use the Contact form.
About Us
Mercury Z are expert in networks, providing business and engineering services to leading corporations, large carriers, and enterprises. Specializing in innovative solutions with the best in technology and design, Mercury Z has the experience and expertise to deliver on projects large and small.
Innovation, from A to Z is what we strive to achieve in the services that we deliver, whether this is network engineering, security, data center services, field installations, project support, cloud services, branded professional services, or wireless solutions. Mercury Z is also a proud partner of ULL Networks, ullnetworks.com.
Innovation, from A to Z is what we strive to achieve in the services that we deliver, whether this is network engineering, security, data center services, field installations, project support, cloud services, branded professional services, or wireless solutions. Mercury Z is also a proud partner of ULL Networks, ullnetworks.com.
listed •
expires
job listing #114343 •
tiny link cabl.co/eDUp
