In Reply to message #365979 by chris kramer
Member Member n4bme is not online, or is invisible.
3/3/2015 8:35:21 PM
n4bme Member #: 99425 Registered: 10/26/2014
Posted: 14 View all posts by n4bme
Company: Fleming Technical Enterprises Occupation: Technical Professional Location: Eastern Virginia
Re: Gainmaker Fine Tuning + ETC
They all should be 750's.  found to be all 870's 40/52 The one at the head end has AGC and the one at the end of the line I think was thermal. They all look physcically the same but I have not actually looked at what is the real difference between the different amps I have seen onsite. All are 4 port
models using all 4 ports except the head end which looks to have been built for the line extender which was found unused from the original construction.

I think the longest run is around 600ft. .625 hardline between amps. Do we care about distances as long the levels look good? I'm going to walk the place and take a reading at the amp and at the taps and see what the levels are actually are. 



Mike


 
This member is a Regular Member.
1 Replies
3/4/2015 8:39:25 AM
massive coax